These next two SWAPs weren't actually girl made, though they certainly could be. The first set were my SWAPs to give out to my unit when I volunteered at camp. The unit name was the "Forest Fairies" and my camp nickname is Shrinky Dink. The second SWAP was something I made with my five year-old son (let's face it was mostly me, though my daughter helped) for "Myths and Legends" camp so he would have a few to swap if he wanted to and wouldn't feel left out.
Shrinky Dink Fairy SWAP
My camp nickname has been Shrinky Dink since last year and I knew as soon as I volunteered for the week I wanted to do a shrinky dink SWAP. I found the shrinky dink paper and thought it would be fairly simple. I was wrong.
The original plan was to print fairy pictures onto the paper, cut them out and make charms. Easy-peasy, right? Well, it turns out you need specialized shrink paper to print using an inkjet, otherwise it smears and runs and makes a mess. My poor daughter was helping and almost wound up in tears when she accidentally smudged half a page as she tried to cut out the pictures for me. I read sanding the paper would help. It didn't. I was able to get a few really nice ones by printing them, quickly sprinkling them with embossing sand, letting them dry overnight, then baking them. But even then, less then half turned out nice (the ink starts to bead right out of the printer) wasting the printer ink, the shrink paper, and the embossing sand. None of which are cheap.
 |
| The few printed ones that worked |
 |
| The majority looked like this. |
 |
| My daughter recycled, using the duds as purses for her SWAPS |
The instructions that came with the shrink paper recommended using stamps and/or permanent ink markers, so this SWAP was born and, hopefully, you can learn from my mistakes. The stamp ink can smear (though not nearly as badly) so you need to blot carefully and give it time to dry between steps. Sharpies work great with very little smudge potential. My daughter did try colored pencils but that didn't work all.
This would be a very fun project for girls as young as Brownies. The only problem is they have to be very careful not to smudge and there is drying time between steps.
 |
| Final SWAP |
Supplies
1. White shrink paper
2. Sandpaper block
3. Fairy stamps (I have the Melissa and Doug Fairy Set)
4. Ink pads
5. Sharpies
6. Scissors and holes punch (mine was flower shaped)
7. Artist's safety pins
8. Beads
 |
| Stamp set on Amazon |
 |
| Stamps and ink pads |
 |
| Sanding block I use |
 |
| Artist Safety Pins from Oriental Trading |
 |
| Metallic pony beads that I used from Oriental Trading. |
Steps
1. Sand the shrink paper. Very important to prevent smudging if you have glossy paper.
2. Measure the width of your stamps and cut into strips (this prevents smudging from leaning on adjacent images when coloring them in.)
 |
3. Stamp a row.
 |
4. Carefully blot the row on a piece of scrap paper.
 |
5. Once done stamping let dry for several hours or overnight.
6. Color in stamps with sharpies and let dry for at least an hour.
 |
7. Carefully blot again.
8. Cut out shapes and punch a hole in corner.
9. Write date and/or name on back with sharpie and let dry at least an hour.
 |
10. Preheat oven to 325.
11. Place pieces on baking sheet, word side down. The sharpie is less likely to come off on the pan. I use a sheet of parchment paper to protect my cookie pan.
 |
12. Bake for 2-5 minutes, until all pieces lie flat.
 |
13. Cool for about ten minutes.
 |
14. Place Shrinky Dink Charm and bead on safety pin. I used "artistic safety pins" from Oriental Trading, but regular large safety pins will work.
 |
| Finished SWAPS. (They are actually much more detailed in person.) |
 |
 |
Shooting Star SWAP
For those of you not familiar with Girl Scout Day Camps, they are 100% volunteer run. Because of this they have units for the boys and preschool children of the volunteers. (Also volunteers' kids are usually free or close to free. A great deal if you have a lot of kids).
My five year-old son attended two camps this summer, one my husband volunteered at and one I volunteered at. Sometimes, they mingle with girls at swap time and sometimes they don't, but I wanted him to have a few just in case. I sent him with 15. My daughter generally goes with 30-50. She once went with 70 and came home with 20, so too many.
I chose these little stars because even my craft hating son likes to melt pony beads and all he had to do is throw beads in the mold and watch them melt. Stars for a "Myths and Legends" camp is a bit of a stretch but all the constellations are based on myths and written in the stars, right?
 |
Supplies
1. Silicon star molds
2. Pony beads of different colors and types (translucent, opaque, pearl etc.)
3. Scissors
4. Oven
5. Gold card stock with message
6. Glue gun
7. Safety pins (gold if available)
Steps
1. Mix three different types/colors of beads on the bottom of the molds so they are just covering the bottom. (If the kids throw in more that's fine too).
 |
2. Preheat the oven to 425. You may want to bake it in the toaster oven outside. We did the first batch inside, but the fumes from the beads kept setting off the fire alarms.
 |
3. Bake for 15-20 minutes until just melted.
 |
4. Using a pointed scissor, swirl the star. You will only be able to swirl two before the scissor heats up and sticks to the beads. I recommend either having multiple scissors handy or doing them in batches.
 |
 |
6. Allow to cool (about 10 minutes) and the stars should pop right out.
 |
7. Print message on gold cardstock and cut out to make a shooting star trail.
 |
 |
9. Done!
 |
No comments:
Post a Comment